ZONE VI WALNUT 4X5 W/LENS *SOLD*

ZONE VI WALNUT 4X5
Up for sale is a nice Zone VI American Black Walnut 4×5 Field Camera with Fujinon W 210mm f5.6 lens in Copal #1 shutter.  This camera was purchased used some years back as a backup and has never been used by us.   It was cleaned, lubed, waxed and put into storage, never being put into service.  Here is the original Zone VI catalog listing for this camera;

“The Zone VI 4×5 Camera has many unique features: Its 18-inch extension and 22-inch bellows can handle, with full movements, lenses to 355mm.  It allows greater than1:1 ratio with a 210mm lens for extreme close-ups. With the 120mm lens, you can get more than a 2:1 ratio. The bellows is removable.  When the optional bag bellows is substituted, unlimited movements with lenses from 47mm to 165mm are available.  There is a front shift movement – rare on field cameras – which is convenient for precise lateral framing. There are tilts from the base as well as through the lens axis; another unusual feature.”
 
“As versatile in the studio as it is in the field, its range of movements exceeds the covering power of lenses designed for an 8×10! Front rise and fall, 3” travel. Front base tilt, 45° forward, 45° back. Front axis tilt, unlimited. Front swing, 17°.  Note: a front drop (we have a 1 ½” drop) achieves the same result as a rear rise. The front shift achieves the same result as a back shift to the opposite side. The camera folded, measures 3 ¼’ by 7 ¾” by 9 ½”. It weighs six pounds. The 545 and 550 Polaroid backs, the Calumet and Sinar roll film backs, and the Kodak Readyload backs are accommodated.”

The camera is in excellent condition, showing little signs of use.  The gold plated hardware shows some normal wear, but all in all is in very good condition.  All movements are tight and function smoothly.  The only noticeable finish flaws are some marking on the bottom of the camera next to the tripod socket (see photos).

The camera is fitted with an original Zone VI Fresnel which has a few very light scratches.  Also included is an additional black walnut lens board, drilled for a #0 Copal shutter.

 Item sold AS IS. . .

NO RETURN. . .

NO REFUND. . .

SOLD


 

Posted by admin in Cameras, For Sale, Lens

WOLLENSAK RAPAX SHUTTER -SOLD-

WOLLENSAK RAPAX SHUTTERSpring cleaning time again. . . we are cleaning out the closet and found a few more odds-n-ends.  This is a Wollensak Rapax shutter from our collection of stuff.  Not sure of the exact size, but do know that it originally came with a 6 1/2 inch WA Dagor that we had remounted.

The shutter runs well, but hesitates, thus it does need a CLA.  Otherwise it appears to be in good working order.  Shutter and aperture blades are clean and work freely.  Lens comes with its retaining ring.

 

 

 

 

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

SOLD

Thank you for your interest!


 

Posted by admin in For Sale, Hardware

POLAROID 545 LAND FILM HOLDERS 1 SOLD…. ONLY 2 LEFT!

POLAROID 545 LAND FILM HOLDERS We have three (3ea) Polaroid 545 Land Film Holders that have been removed from hibernation in the equipment closet.  All three holders have seen some use, but were functional when last used.  The rollers are clean and in good condition.

UPDATE: One holder has sold, two remaining for $70.00 or $40.00 each, plus shipping.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

 

FedEx Insured Ground Shipping

Contact Us For Shipping Quote

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!


 

Posted by admin in For Sale, Hardware

TATONKA LASTENKRAXE V2 PACK FRAME —SOLD—

TATONKA LASTENKRAXE V2 #Tatonka #Lastenkraxe TATONKA LASTENKRAXE #Tatonka #Lastenkraxe Here is a new, never used, Tatonka aluminum outer frame back pack carrying system. This is the V2 system and is rated for loads up to 50kg (110lbs). We purchased this when we began researching packing larger cameras. We never used the pack frame, since we designed our own internal frame packs from scratch.
From the Tatonka web site;

Combination of aluminum frame and carrying system for loads of up to 50 kg. The Lastenkraxe carrier frame from TATONKA combines a resilient frame with the flexible V2 carrying system, thereby enabling you to carry very heavy loads. The carrier’s welded outer frame is made of aluminum and, with four diagonal cross bars, is extremely sturdy. The integrated stand ensures that even once you’ve put it down everything stays in place.

Features: V2 carrying system; Maximum frame load up to 50 kg; 25 cm deep arm; Diameter main frame tubes: 24 mm; Diameter diagonal frame tubes: 20 mm; Four diagonal cross bars; Stand

https://intranet.tatonka.com/infosys/infocgi/artinfoe.dll?1130&0

#Tatonka #Lastenkraxe
This pack frame is new, only a few scrapes here and there from being moved around in the storage closet.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

SOLD

Please refer to our Terms of Sale.

Thank you for your interest!


 

Posted by admin in For Sale, Hardware, Supplies