Latest

WISNER 4X10 TECHNICAL FIELD CAMERA WITH 5 FILM HOLDERS

Up for sale is a first-rate Wisner 4×10 Technical Field Camera. This was Susan’s prime horizontal camera until recently. Some Wisner cameras had ‘issues’ but this one has been completely gone through, adjusted, and has some custom upgrades. It is constructed of solid mahogany, with brass and stainless fittings.

The original red bellows has been replaced with custom-built black synthetic bellows. Some critical, load bearing wood screws have been replaced with threaded bushings. The close latches have been replaced with a custom stainless steel swing-away design that does not hang up on the dark cloth. See photos.  (Click Image For Larger View)


Here are the original specs from Wisner;

WISNER TECHNICAL FIELD 4X10

Minimum Bellows: 3.25”
Maximum Bellows: 23.0”
Front Rise: 1.125”
Front Fall: 2.00”
Front Shift: +/- 0.50”
Front Tilt (Axis): Limited by bellows
Front Tilt (Base): 35 deg Froward & 90 deg Backward
Front Swing: +/- 12 deg
Rear Rise: 1.5” Geared (Patented)
Rear Tilt (Axis): 25 deg Backward (Geared)
Rear Tilt (Base): 20 deg Backward & 90 deg Forward
Rear Swing: +/- 10 deg
Lens Board: 4” x 4” Standard Wisner
Folded Dimension: 8” x 14” x 4.75”
Tripod Thread: 1/4-20 & 3/8-16
Spirit Levels: L/R & F/R
Weight: 7 lbs

The camera is in excellent condition, showing little signs of wear. The lacquered brass is in very good condition, showing little signs of tarnish. All movements are tight and function smoothly. It has also been regularly cleaned, adjusted and waxed. We take extremely meticulous care of our cameras. This camera has been a work horse, yet its condition, functionality, and usability is top notch. You will not be disappointed.

Also included are five vintage 4×10 film holders. One is a Kodak and the other four are Halsey, probably manufactured in the 1950s. These holders are wood and metal design with aluminum dark slides, and are in fair to good condition. They are the X-Ray holders the Wisner camera was designed to use. They all fit the camera back well. The holders show signs of use with some scrapes in the painted surfaces and dark slides. None of these holders have been tested, so we cannot guarantee they are light-tight, but there is no obvious signs of damage, nor anything visually that would indicate they are not useable.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

$1,995.00 plus $40.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

PACKARD-IDEAL SHUTTER, 4×4 INCH

Here we have a used 4 inch Packard-Ideal Shutter with 2 inch opening.  Shutter is old, and has been used, but works fine. 

 Also included is 57 inches of original tube and bulb.  The bulb is cracked and the tubing is stiff, but still works fine.  New tubing and bulb are available from the manufacturer; packardshutter.com.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

$40.00 plus $10.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

KB CANHAM 4X10 GROUND GLASS PROTECTOR

Do you own a Canham 4×10 camera and do you need a ground glass protector?  Well, here you go.  This is a KB Canham 4×10 acrylic ground glass protector.   It has been used and has some signs of wear, (scratches in the soft acrylic) but is 100% useable. The protector is 4 9/16” wide, with an overall length of 12 3/16″ and should fit any 4×10 camera that uses a Canham-style film holder.  If you are worried about breaking your ground glass, this is what you need.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

SOLD

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

SCHNEIDER COMPONON f5.6 360mm

For sale; a Schneider Componon f5.6, 360mm lens in barrel.  Lens is in very good condition, aperture works freely.

Lens shows some signs of wear but should perform well.  Includes tapered mounting flange, plus front and rear lens caps.

 

 

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

$175.00 plus $18.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

B+W 110mm ULTRAVIOLET (UV) FILTER (Extra Wide)

B+W 110mm Ultraviolet Filter in excellent condition.  Filter came with a lens we purchased years ago.  Has been in storage in original plastic case.

  • For Wide Angle Lenses

  • Protects Front Element

  • Minimizes Bluish Cast

  • No Color Shift

  • Use for Film or Digital Photography

  • Rugged Black Brass Filter Ring

  • High Quality Schott Glass

The current B&H Photo price for this filter is $189.50.

 

NOTE: Items sold AS IS. . . NO RETURN. . . NO REFUND. . .

$125.00 plus $9.50 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

 

    Please refer to our Terms of Sale.

Thank you for your interest!

KB CANHAM 8X10 FRESNEL & GROUND GLASS PROTECTOR

Here is a Fresnel and Ground Glass Protector for the KB Canham 8×10 Traditional camera.  Both items are used and show signs of wear.  There are scratches around the edge of the Fresnel and a couple of scratches in one corner (see smaller photos below).

The Ground Glass Protector also has been used and shows light scratches from being inserted and removed from the camera back.  Other than these few battle scars both items are in good useable condition.

New the Fresnel is $229.00 and the GG Protector is $42.00 from Canham.

NOTE: Items sold AS IS. . . NO RETURN. . . NO REFUND. . .

$125.00 plus $12.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

    Please refer to our Terms of Sale.

Thank you for your interest!

FIBERBILT PRINT SHIPPING CASE 14″ X 17″X 4.0″

This Fiberbilt Print Shipping Case is a 14 x 17″x 4.0″ Deep (Black) polypropylene shipping case with heavy-gauge steel corners designed for transporting and storing mounted or matted prints, pictures or artwork. The case has a full-size cardboard liner to prevent scratching. It uses 1.0″ nylon web quick-release straps with buckles to seal the case. The case has a mailing label space and a carrying handle.

This case is in near new condition. It has been modified with wooden corner spacers for transporting one of our portfolio boxes with an outer size of 12” x 15” and is 4” deep. NOTE: The wooden spacers are removable.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

$75.00 plus $18.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

TOYO 4.3″ LENSBOARD, DRILLED COPAL #1

Toyo 4.3″ (110mm) square lensboard, drilled for Copal #1 shutter.

Board is in very good condition.

 

 

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

$30.00 plus $9.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

SCHNEIDER G-CLARON WA f6.3 270mm

For sale; here is a Schneider G-Claron WA 270mm lens in barrel. Lens is in excellent condition and includes barrel mounting spacer and retaining ring, plus front lens cap.

Click HERE to download a PDF version of the Schneider G-Claron WA brochure that includes all of the technical specifications for this lens.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

$350.00 plus $18.00 FedEx Ground Shipping

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!

TATONKA LASTENKRAXE V2 PACK FRAME

Here is a new, never used, Tatonka aluminum outer frame back pack carrying system. This is the V2 system and is rated for loads up to 50kg (110lbs). We purchased this when we began researching packing larger cameras. We never used the pack frame, since we designed our own internal frame packs from scratch.

From the Tatonka web site;

Combination of aluminum frame and carrying system for loads of up to 50 kg. The Lastenkraxe carrier frame from TATONKA combines a resilient frame with the flexible V2 carrying system, thereby enabling you to carry very heavy loads. The carrier’s welded outer frame is made of aluminum and, with four diagonal cross bars, is extremely sturdy. The integrated stand ensures that even once you’ve put it down everything stays in place.

Features: V2 carrying system; Maximum frame load up to 50 kg; 25 cm deep arm; Diameter main frame tubes: 24 mm; Diameter diagonal frame tubes: 20 mm; Four diagonal cross bars; Stand

http://intranet.tatonka.com/infosys/infocgi/artinfoe.dll?1130&0


This pack frame is new, only a few scrapes here and there from being moved around in the storage closet.

NOTE: Item sold AS IS. . . NO RETURN. . . NO REFUND. . .

SOLD

WE ONLY SHIP TO U.S. ADDRESSES
PAYMENT VIA PAYPAL PREFERRED

Please refer to our Terms of Sale.

Thank you for your interest!